Of course! Because of the modern design this product can be used in any room.
You can get small aroma bottles at your local wellness shop or on the internet. Some aroma-therapies, like eucalyptus, can be used to clean the airways when you or your child have caught a cold.
Don’t worry, it will not be a problem. But keep in mind that it will take longer to get the same humidifying results.
This depends on a lot of factors. Let us start off by saying that it’s important to know that relative humidity is the amount of moisture in the air compared to what the air can “hold” at that temperature. When the air can’t “hold” all the moisture, then it condenses as dew. The RH that can be reached depends on the room temperature, usage and room size. The amount of moisture that can be released in the air (per hour) is and 220 ml. 1 ml is equal to 1 gram.
For example, at 20˚C a cubic meter of air can hold a maximum of 18 grams of water. At 25 ˚C, it can hold 22 grams of water. If the temperature is 25˚C and a cubic meter of air contains 22 grams of water, then the relative humidity is 100%. If it contains 11 grams of water, the relative humidity is 50%. So if a room is 4 x 2 x 2,5 meters (20 cubic meters) at a temperature of 25 ˚C, the air can hold a maximum of 440 grams of water in the air. Depending on the current humidity in that room, it should take just a few hours to reach the desired RH.
The water level has reached below the minimum or the tank is completely empty. Please add water.
Do not run for more than 8 hours continuously to prevent an over humid room. Use a hygrometer or hygrostat to determine the room humidity (the ideal relative humidity is around 50%).
Yes, it does. When the temperature in the room is higher, it can hold more humidity. The ideal room temperature is between 18 and 20˚C.
Cleaning instructions are clearly showed in this video -> https://youtu.be/CbtTKw75FBQ.. DO NOT clean the tank with hot, boiling water or place in the dishwasher.
Please put your projector on a higher surface to cover the projecting distance (max. 1.8 metres). The further away you put the projector, the blurrier the images get.
Yes, you can turn off the voice activation function. Just switch on the baby projector with the “bulb” icon and the projector will work for 30 minutes without re-activating.
It can be switched on/off whenever you want to.
When you turn on the baby projector with the “power” button (left button), the projector will project for about 30 minutes. If no sound has been detected for 30 minutes, it will go into “stand-by” mode. It will then “wake up” again once a sound has been detected.
No, you can only use projections with voice activation (pre-set). If the voice activation accidentally activates at night, the child will not wake up from the projecting, but could wake up from the lullabies.