A regular booster seat lifts the child to be in the position of an adult. Mifold does the exact opposite, instead of lifting the child up it holds the seatbelt down. It does this at three points: there are belt guides on either side of the child's hips to hold the lap belt correctly against the bones and off the soft stomach. These belt guides are adjustable to three sizes to make sure that the belt is always held snugly in place. There is a third clip on a strap that pulls the seatbelt chest strap down correctly onto the bones of the shoulder; away from the face and neck. So like a regular booster, Mifold holds the seat belt in exactly the correct position on the bones of the hips and the bones of the shoulder, without needing a big, bulky seat to lift the child. In a collision, the child is protected in the same way. Mifold simply works to hold the adult seatbelt correctly on a child.
Mifold is a revolutionary new car safety solution. There are many journeys where children do not have a booster (in fact we estimate in as many as 25% of all child journeys - and research has shown that 50% of kids in the USA don't have the right booster when carpooling for the school run) we want to eliminate these risks completely. With a compact and portable device, there are no excuses, a child can always be safe no matter whose car they are in.
The adult seat belt chest strap must lie on the child's clavicle (collar bone); not on the face or neck and not over the edge of the shoulder. The Mifold shoulder belt positioning strap and clip is attached to the back of the Mifold seat and goes behind the child’s back. The clip is then attached onto the adult seat belt chest strap and holds it down on the clavicle. The length of the belt positioning strap and clip is adjusted to the right position.
One of our priorities has been to design Mifold to be comfortable as well as safe and easy to use. There are more than 100,000 Mifold seats in use and in research. We have had positive feedback about comfort and our users tell us that they really do love it.
The comfort comes from three design and engineering factors:
- We use a unique EVA DenseFoam™(Ethylene-vinyl acetate) to provide constant support at the pressure points. EVA is typically used as a shock absorber in sport's shoes and boxing gloves.
- The foam fabric pad extends to the edge of the seat to ensure there is no hard edge. And
- the child’s weight is designed to sink the entire Mifold seat into the vehicle cushion, levelling out the two surfaces and minimising the edge effect. This is exactly the same as with a regular booster seat. They only have a thin layer of foam/fabric on a plastic/Styrofoam base and most of the comfort comes from the underlying car seat (the same thing happens with a hard-backed book … try it!).
Mifold comes in 6 exciting colours: Perfect Pink, Denim Blue, Lime Green, Slate Grey, Pearl Grey and Yellow Taxi.
In 1963, Dean C. Hunter filed a US patent for the “Safety Seat” … a box that lifted up a child and held a lap belt in place across the bones of the child’s hips. Today, half a century later, boosters are essentially the same ... blocks that lift a child up to meet the adult safety belt. Mifold changes this. Instead of lifting the child up, Mifold does the opposite and holds the seatbelt down to fit the child. Our patent "Apparatus for adapting a seatbelt for a child" is already granted in one country and pending in 45 others (http://j.mp/mifold-patent).
At this stage, the Mifold Grab-and-Go booster seat cannot be cleaned in a dishwasher. We have designed Mifold to be easy to clean by washing the surfaces with a mild solution of soap and water. Do not use bleach. Remove the soap by wiping with clean water and after washing then air dry. Although we had hoped that the Mifold Grab-and-Go booster seat could also be cleaned in a dishwasher, at this stage we have not tested how a dishwasher may affect components and specifically, how a dishwasher may affect performance and the flame retardant properties of the materials. If there is an update on this issue we will publish revised guidelines via our website and social media channels.
Mifold is designed for children aged 4+ years. However, car seat regulations can be quite confusing and are different in each country; they can be based upon age, weight, height or a combination of all three. In the US and Canada, Mifold is designed for children weighing from 40 Ibs to 100 lbs (18-45kg) and between 40-57 inches (100-145cm) tall. In the EU the weight range is from 15kg up and until a height of 150 cm.
Mifold is constructed using aircraft grade aluminium 6061 and a super tough plastic polymer called Delrin® 100ST from Dupont™. It has been successfully crash tested and each component rigorously tested to ensure its longevity even under the most extreme use as a child car seat.
Mifold is manufactured in China. Our manufacturing partners are world renowned manufacturers that are ISO approved and operate at the highest level of manufacturing and quality control standards. They already manufacture child restraint products for several other well-known companies.
Mifold is designed to work without a latch system. Regular booster seats lift the child to be in the position of an adult, Mifold does the exact opposite. Instead of lifting the child up it actively holds the seatbelt down, positioning it correctly on the hips and on the shoulder of the child. A latch system does not help with this mode of operation. Also, there is no installation required with Mifold, it is designed for 'quick-in-quick-out' usage for every journey in every type of vehicle.
Mifold is not designed for adult use and should not be used by adults. Many people do ask this and, in fact, Jon's wife is only 150cm (~5 foot) tall and she often complains about the seatbelt bothering her. Our main market is the child restraint market and that is what we are focussing on in terms of regulatory approval. When we are well established in the child market we will evaluate the feasibility of designing a Mifold for adults.
The Mifold booster car seat conforms to the most universally accepted global booster car seat regulations. European Union ECE R44.4; FMVSS 213 in the United States, and the RSSR regulations in Canada.
The Mifold booster car seat conforms to the most universally accepted global booster car seat regulations such as ECE R44.4 for the EU, and FMVSS 213 for the USA. These standards are different, and as a result, there are some minor design changes between the versions. Specifically, the product dimensions differ slightly from country to country. Secondly, the labelling and language requirements vary between territories. This means that the labels and instruction manuals are different based upon the market. Finally, in all territories, whilst the Mifold booster seat is designed to be used by children from the age of four years old. However, there are also height and weight recommendations that vary according to the country.
As with other manufacturers of child restraint systems, we do not publish our crash test videos.
Mifold is a backless booster seat that is fully compliant with US FMVSS 213 (for backless booster seats) as well as EU R44.04 which covers the UK and Europe; these standards do not include side impact protection. There are other products available that offer different features, some that exceed the standards (we have used them with our own children over the years). Mifold is creating a whole new solution. There are many journeys where children do not have a booster (we estimate as much as 25% of all child journeys - and research has shown that 50% of kids in carpools for school runs don't have the right booster). We want to eliminate these risks completely. With a compact and portable device, a child can always be safe no matter whose car they are in. The massive improvement in child car safety over the last two decades has come from the adoption of car seats. Statistically, there can only be a minor reduction in the current rates of injury or death by improving the protection in existing car seats. However, continuing the increase in the use of approved seats, where one is currently not available, can still offer a major improvement and we are excited by the prospect of Mifold contributing to this car safety objective.
The "more than 10x smaller” size claim is based on the external dimensions of the Mifold Grab-and-Go booster seat, and the volume it occupies. Compared to regular booster seats commonly available in the markets, Mifold is less than one-tenth of the size, or as we say, "more than 10x smaller.”
The “just as safe” claim is based on the Mifold Grab-and-Go booster seat's compliance with booster seat safety regulations for child restraint systems in different territories. See our other FAQs for specific details of the territories where Mmifold is compliant with local booster seat safety regulations.
Mifold carries an expiry date of 7-years from the date of manufacturing as marked on the product. Every car seat is different, so always read the user guide to find out the seat's expiration date and other important information. Most car seats last between five and nine years after they were manufactured (not necessarily after they were bought); that's why it is important to check the user guide.
To view the Mifold Booster Seat pricing and availability, please click the link here: http://www.justkidding-me.com/ae/mifold-booster-seat